FURminator Review

Hello everyone! Long time no post. If you follow me on Instagram, you probably know that I finally got my hands on a Furminator brush after many failed purchases and attempts to rid me of my cat’s shedding problem. This post goes to everyone who’s thinking of getting one but is too hesitant to spend such a big amount of money on a hair brush for their pets! Before I start reviewing it, I’d just like to point out that I will be in no way biased and “over-recommend” this product just for the heck of it. I’ll tell you exactly how it worked for me, and provide pros and cons, and you be the judge :)

So being a person who’s 102% conscious about where she spends her money and on what, the idea of purchasing an almost 300 AED shedding comb for Tiny was completely out of the question. But after about a year and a half switching between different types of combs- the slicker brush, deshedding comb and a flea comb- that were almost useless, I decided to give it a go, but that I’d find myself a bargain ;)

After looking through amazon, I found an awesome deal of only 110 AED (including shipping fees from the US to Abu Dhabi) for a long-hair small sized Furminator comb for cats. (It couldn’t deliver straight to the UAE, so I had to use a US address and then had Aramex deliver it to Abu Dhabi. The cost above includes all of these expenses, so it would’ve been around 70 AED only if it wasn’t for the extra shipping :’) Much better than 300 AED!!)

I chose the long hair option because Tiny is a cross between a shorthair and a Persian according to his vet, and his hair is a about 2-inches long, and a small comb to make it easier for me to get into sensitive areas like his face or paws, as I’ve had one of the big slicker brushes and found it hard to brush these areas because of it’s size.

Now on to the brush itself, I can honestly say I was pretty impressed and wasn’t disappointed at all. A couple of brushes with a Furminator do go a long way!

Pros:
1) It’s teeth were designed differently that any slicker brush (which I thought otherwise previously..) and it kinda works like a rake, I’m not kidding lol. You can actually feel the brush pull the dead hairs out!
2) The teeth really dig in the coat, to catch a lot of the dead hairs not just from the top of the coat, but from inside. My slicker brush had long teeth, but it just wouldn’t dig in the coat properly, so it only caught the dead hair from the top, and left me with a horrible inner coat of dead hair madness!
3) This one is pretty obvious if you know a little about Furminators. It is easy to get the dead hair out of the brush from the handy button :P I used to wash my slicker brush to get most of the hair out because it was hard to pull it out by hand (and sometimes, it would bend the teeth, yikes!) so this was a much appreciated feature xD

Cons:
1) Of course, with every item, it has it’s cons, because it isn’t perfect. What I found a little bothersome with the brush is that when I managed to go through his whole coat, it would leave a lot of stray hairs at the top, something that I haven’t experienced with the slicker brush (Probably because it didn’t do such a good job lol) I guess it’s more of an expected effect than an actual problem with the brush. When he’d shake his head or when I’d pat his coat, it would drop a lot of dead hairs that weren’t caught by the brush. Does that make sense? :P However, I guess a good bath is the solution to this problem.
2) You must be careful when brushing your pet as the teeth are quite stiff and pointy, and I’ve had a lot of panicky moments where I was afraid I had cut him. So make sure you’re a little careful :) It’s not in any way like a shaving tool, but just a little consciousness while brushing is required.

In the end, I give this product a 7/10 because it wasn’t a marketing lie, it really does work like they said it would. Here’s a picture of all the hairs I’ve gathered just for this post:

IMG_5855

IMG_5861Placed my hand beside it so you can see the approximate size lol.

I would have been able to get rid of 100% of Tiny’s dead hair if he was a lot more cooperative, since he hates his grooming sessions :’) I constantly have to entice him with treats to get him brushed. I am working on training him to get used to it though, so wish me luck!

Thanks for reading folks, and as always, if you have any questions, feel free to ask me :)
Have a nice long weekend and happy National Day! <3

– Reem AlHashmi

Make your own Minion!!

Yes, you read that right! Finally, I have put together another crafting tutorial for you guys, and this time I’m going to be showing you how to needle felt your very own little minion! :)

IMG_4163

Now I explained what the art of needle felting is in my previous post, but if you missed it, check it out here. The explanation is at the bottom.

Let’s get to work~

Materials you’ll need:

– Needle felting needles (Yes, those are different from the ones you use to sew)
– Wool batting in colors Yellow, Dark+Light Blue, Grey, Black, Brown and White
– Foam or Styrofoam mat
– Lots of patience as this takes up some time, but it is so much fun!

Let’s get to the lab work! ;)

Step #1

Using your yellow wool, cut your desired length and with your hand, shape it into an oval-ish potato shape, like that of a minion. Then, proceed to stab it with your needle (a lot) until it holds its shape. It MUST be firm and look like the picture below, because what you’re actually doing is tangling the wool until it’s so tangled you won’t be able to alter it’s shape afterwards.

If you want your minion to be big (size of your palm for example) make sure you cut a big piece of wool, otherwise, if you start small, you’ll end up with an even smaller figure, because the wool shrinks a lot during the process.

IMG_3950

IMG_3951

IMG_3953

IMG_3956

 

Step #2

Once you get the hang of “needle felting”, the rest of the steps are basically easier than easy. I’m a beginner myself, and if I managed to do it, then so can you! Shape two smaller oval shapes with your dark blue wool and stab them for a while until they’re nice and firm. Then, stick them on your minion, but not with glue of course. All you have to do to attach them is stab them continuously in your desired spot, making sure you stab vertically and on around the sides of the “oval feet” to make sure they’re really in place and won’t fall off easy. Make them a little smaller as we will add their shoes, and their overall feet are very small.

IMG_3959
IMG_3961
Step #3

Now it’s time to dress him up in overalls! This time, we’re not making shapes, we’re layering the wool onto an existing shape, which is the minion we have now. Take your dark blue wool again, and spread it over the bottom quarter or so of your minion, leaving space for the short sleeves and the front pocket. Then stab your way around it’s body until the blue wool is stuck firmly and you cannot pull it out with your fingers. If by the stabbing you’ve noticed the blue goes deeper inside and yellow is revealed, don’t fret! Add some more layers until you’re satisfied :)

I then added the front pocket and the sleeves. Basically just eye-ball where you would place his hands in the next step, and just add the sleeves around that area.

IMG_3965
IMG_3973

Step #4

Next, roll out some long yellow wool, needle felt it and attach it to your minion. I know it might seem like my minion’s arms are long, but minions’ arms go down to their feet :P Make them just a smidge bit shorter because we’re adding black parts in the end as their gloves.

IMG_3976

Step #5

Here, I skipped a few steps because I’ve already explained the basics on how to do them during those first few steps. Just add his details, black pieces for shoes and gloves, a cute little smile and of course, his signature goggles.

IMG_4072
IMG_4073
IMG_4098

If I’m not mistaken, I think I made myself a Dave, because of his weird looking six pieces of hair on his head :P Dave and Kevin are my favourites tbh! xD

And that’s it, you’re done! Here’s what my minion looks like :D

IMG_4165
IMG_4166

IMG_4172

Our bananas are green lol!

You can even make him follow you everywhere by making him into a minion pin! Just stick any ordinary safety pin through his bottom (If you want him to sit on your shoulder like the first picture at the top) or back (if you want him to stick like a brooch), then onto your piece of clothing! Honestly he compliments my Abaya so much <3 :D

Thank you guys so much for reading and I hope this tutorial motivated or inspired you to make your own little minion. If you did, always feel free to share your creations with me :) I love knowing people benefit from my tutorials!

Until next time, have a good weekend everyone!

- Reem AlHashmi