How I paint my doll’s faces! {Walkthrough}

Much overdue. Such late. Wow.

Sorry for disappearing for quite some time, was finding it really hard to find motivation to type up something new, but hopefully this will not happen anymore. Working on multiple new projects and I’m very excited to document the process with you guys :)

I wanted to share the process of giving my dolls their faces, as my friends have also expressed some interest in it, so I shall deliver. This isn’t technically a “tutorial”, but more like a walkthrough of the steps that go towards painting a face on a blank doll head. Let’s start!

Step #1 – Preparing the workspace

Info
I also use Winsor and Newton Professional grade acrylic paint, Faber-Castell watercolor pencils, my trusty airbrush (although it was broken when I worked on this head) and Liquitex Matte Varnish as a final sealant to set everything in place.

IMG_4871

 

IMG_4868

 

IMG_4887

I also bought this palate that comes with small empty cases to store my different mixes of pastel colors, as it is such a hassle to get the correct color (mixing powders is not the same as mixing paint) only to have it wasted once a head is finished. Now it looks like an eye-shadow palate, no? ;)

Step #2 –  The Foundation Step

IMG_4876

After priming the head (sealing x3) I get a natural skin color pastel that’s a little more saturated hue than the actual head’s color and lay the foundation base, to make the head more ‘alive’ and not one-toned and empty.  Under the eyes, temple, lower cheekbones, inside the ears, and sides of the nose. Some people use pink pastel… that is very very wrong.

Step #3 – Eyes

IMG_4878

a)    Details: Drawing in the eye crease. A crucial step, without it, the head will look off. Even Barbie has it lol.

IMG_4879

b)   Eyebrows: One of the hardest parts of a faceup. I start with a pastel base first to determine the shape, and then I start layering in the color and adding hair details with a watercolor pencil. If you start with pencil first, it is so much harder to erase any mistakes, and sometimes it doesn’t get removed all the way. Trust me, I learned this the hard way.
Note: Her eyebrows are light because she is blonde ;)

Step #4 – Eyeliner and lashes

 

IMG_4884

IMG_4885

My favorite part ^^ For the eyeliner, I start with painting the inner/upper waterline with black acrylic paint. Then after it dries, I draw in the actual eyeliner using a water-colour pencil, and then taper out the ends. It’s almost the same as drawing in your own real eyeliner except it is much easier because you hold this head in your hands xD Look how pretty this cat-eye is *-* <3

Then after that, I lightly draw in some bottom lashes, and in this case, I added some eyeliner on the bottom waterline to redefine the eye shape :-) I do not draw in upper lashes (that would be hell to draw) as I apply real eyelashes and glue them on! ;)

This time, I used super long ones as I was always hesitant about the length previously, and because of that they didn’t photograph or show very well, so now you can seen them from around the block haha! My mom calls them “Mkashat”, which basically means, fly swatters in English :P

At this point I had already painted her lips, blushed her face and contoured it with a bronze/brown colour to give it an edge and make it pop! The final stage is glossing the lips and bottom waterline to make her eyes look ‘teary’, because our eyes are not matte either ;P I also add a puff of pearl shimmer to the face because I love anything and everything that glitters <3 It’s very subtle though.

After the wig, eyes and clothing..

Too much fun with Nova


Too much fun with Nova

She currently has some silver nail polish on [yes, I can paint her hands too ;) ], and I’m not liking it. I’m going to give her a French Manicure later on, because it never goes out of style! Keep in mind that her nail is like 3 millimetres… so if you thought doing your own manicure was hard.. x_x

Thanks for reading everybody! Hope your enjoyed this post :) Again, if you have any questions, feel free to ask me! Next post will be about my newest doll, and it may be a video, so stay tuned! :D

Love,

~ Reem AlHashmi

Eye Mechanism Mod for Dollsbe (Be With You)

So as you all know I posted a few days ago about my newest dolly addition, a Be With You – Carrot (which is still nameless btw >_<) and I haven’t clearly shown the inside of the eye mechanism I mentioned. It is my favourite feature of this doll, and it’s taking doll photography to the next level. In the “past”, you basically insert eyes by taking the wig off first, then the head cap, and then inserting the eyes with a piece of blu-tac or sticky tack (eye putty) and position them accordingly. Now you basically push the lever around to move the eyes and that’s it :)

Now the thing is, this mechanism can only be used with stemmed eyes. And not all companies supply that. In this post I’ll be modding some Oscardoll eyes (that have a flat back) that I bought about a month ago from the Doll Peddlar, so I am able to use it from now on! You can follow this tutorial for any type of flat back eyes if you have any of the Dollsbe dolls from YG.

Let’s start!

IMG_2725

The standard Dollsbe eyes can in fact be taken a part from the visible line between the pupil and the stem. Rotate, and pull out. After separating the pupil, I placed it on a flat surface along with my Oscardoll eyes to see if they are the same “height”, which luckily, they are. I’ll tell you what to do if they aren’t the same in a bit!

Now what I’m trying to do is create a stem for my stemless eyes. Easy! I got out my trusty polymer clay and formed a sphere, then pressed it on the surface to flatten one side and moulded it into a good shape until it looked like the other half of the “eyeball” like this…

IMG_2740

IMG_2736

Next is the stem. I rolled out a thin piece of clay, and poked a hole through it from one end to the other, because that’s where the spring will be inserted. Picture of the whole thing will be below! Plopped it on the dome I created and fixed it with my favourite, Scupley bake-able glue! If you’re a polymer clay enthusiast, I definitely recommend this. It is a life saver!! If you don’t have some, just make sure it is stuck properly or it will fall/break off!

Also make sure your stem length is equivalent to that of the standard eye stem.

IMG_2748

IMG_2756

IMG_2767

After baking, it should look like this! Starting to come together :) This is where the spring is shown. The lever you move around is actually moving the springs, which in turn moves the eyeballs.

IMG_2775

To attach to the eyes, I used eye putty and firmly pressed the pieces together, they stick really well!

IMG_2779

Now this is the testing stage. You will need to experiment on the size you have now. This is why I mentioned the stem must be closest to the original one, because when I inserted the spring on the eyes I have, the springs were longer than the “hole” we poked on the stem, and couldn’t be inserted unless they were compressed, which won’t move the eyes that way. I tried making it as close as the original, but I still needing to fix things here and there.

DO NOT CUT THE SPRINGS. I say this because that would be a reckless thing to do :’) The spring stays, the stem goes. Well, is modified.

Using my pointy tool, you can use anything available, even a toothpick I suppose, I gently dug through the stem to make it deeper, providing more space for the springs to go in further. In the end, I ended up drilling a hole right through, but that might not be the case with you. I didn’t measure everything to the tiniest detail, but you can do so. Try looking at where the stems of the original eyes sit on the springs, and compare it with your eyes, and drill accordingly.

Another issue I encountered was the stems were a little too long, and touched the edges that hold the springs, and again, prevented movement. Simply “shave” or cut down your stem accordingly if you face the same thing, but do NOT go overboard. If your stem is short, then the springs will not be able to move the eyes. It would be too heavy. I even trimmed the front part, where the eyes would stick, and that helped too. Trimming this is much better than the stem, but you be the judge.

IMG_2792

IMG_2785

IMG_2789

After many many trimmings and modifications, I finally got it to work!! This is what it looks like inside:
You can see here the right eye’s stem is perfect, not touching the mechanism, whereas the one of the left is slightly longer, and with movement, it would rub against it. Trim here and there~

IMG_2826

IMG_2814

A huge part of this hobby is trial and error, which sometimes even I hate to admit. I like things to work from the first try (who doesn’t?) and first try only, but that wouldn’t get me anywhere. I’m proud of myself that I persevered and didn’t quit. xD

Here’s a video testing it just because: (I apologise for the loud banging noises and the camera focusing sound, I did not know it did that :( I am angry at the salesperson now.)

Man I love these eyes. I do not see myself ordering any eyes other than Oscardoll’s anytime soon. They’re so gorgeous! I wasn’t really liking them at first because I thought it was weird having eyes that had all sorts of stuff in them, but what was I thinking lol. I knew nothing. They’re better that way <3 There’s a whole variety of eyes that have flowers, gems, and one with a fish! Not a live one though, haha. If you’ve not heard of them, check them out here! They sell like hot cakes, so grab ‘em while you can.

In the meantime…

Vogue, baby. Vogue.

IMG_2861

IMG_2904

Thanks for reading guys! Hope this helps people who want to make the most of their eye mechs ;)

– Reem AlHashmi